Parts & Accessories

The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples

Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

Chromoly 3/8" socket head bolts for use in any Profile BMX/MTB or Madera 3/8? threaded hub axle. -Bolts sold individually -Washers and cones not included -Use 8mm or 5/16' hex keys

-The Aegis Rear Hub Guard is Designed with today’s smaller dropouts in mind, it replaces the cone spacer on 3/8 hubs as well as the cone spacer and lock nut on 14mm hubs.-Fits all Profile Mini, Elite, and Totem Cassette hubs, as well as Madera V2 Cassette hubs. -The Aegis Front Hub Guard will fit on Profile Mini, Totem, and Elite front hubs, as well as the Madera Pilot V2 hub. It replaces the cone spacer. Priced Individually

REAR (DRIVE SIDE): -The Profile Racing C4 Drive Side Guard is made from injection molded plastic. -Must be used with the proprietary steel insert which threads on 14mm axle and substitutes existing drive side jam nut. -Can be used on all 14mm rear Profile and Madera Cassette Hubs (including Madera V-2 and Gulf Coaster, and Profile Mini, Totem, Elite, and Zcoaster). -Can be used on either RHD or LHD Hubs. -Works only with 14mm axles REAR: -CNC machined from Delrin (a really strong and durable plastic) -Can be used on Profile Elite, Mini ,Totem, and ZCoaster rear hubs as well Madera V2 Rear hub in 14mm Only. -Works only with Madera and Profile 14mm axles as the guard fits over the jam nut. Will NOT work with 3/8 hubs. -The hub guard slides over the 14mm jam nut – It will sit snug against your drop out and hub cone when the wheel is tightened down. FRONT: -CNC machined from Delrin (a really strong and durable plastic) -Can be used on Profile Elite & Mini front hubs as well as Madera Pilot front hubs. -Works only with Profile/Madera Knurled cones. Will NOT work with the older style, all aluminum front hub cones. -You can buy an adaptable cone with the guard if you don’t have the right one. -The hub guard slides over the hub cone – It will sit snug against your fork and hub cone when the wheel is tightened down. Note: Plastic wears faster than aluminum, especially when used on very rough surfaces. The Madera C-4 guards are intended to be used for ramp and light street.

Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. -For 1/8 width" chains. -Drivers include bearings & seals. -Pawls, springs, & cogs NOT included. -Drivers are RHD/LHD compatible.

Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. For use on Profile Racing Elite Cassette hubs.

This kit allows Profile Mini, Elite, High Flange, Totem, or Madera V2 hubs to be converted from 14mm axles to 3/8?(10mm) bolt on axles. Kit includes: -2 socket head bolts(3/8-16 thd)-Titanium upgrades available -2 volcano cones for bolts -2 steel 3/8? washers -2 cone spacers -1 threaded center axle(Chromoly)

Designed to fit most rear hubs, sliding over the existing hardware on the non-drive side. Constructed from 100% heat-treated chromoly, the Mission Guard is guaranteed to hold up to a long life of grinds on all surfaces! Product Specifications - Material: Heat Treated Chromoly - Axle Size: 14mm - Compatibility: Most rear hubs - Weight: 4.0oz

The Kink Universal Driver guard is designed to fit most modern freecoaster and cassette hubs using either an 8T or 9T driver. The guard is made from heat-treated chromoly steel, giving it a ton of strength and long lifespan. The slim chromoly design means it can slide between your existing hub hardware and dropout, which allows for easy installation with only a wrench or socket to loosen and tighten axle nuts

- Standard American Schrader Valve - CNC Machined from 6061 T6 aluminum - Knurled body for added grip - Sold as a pair - Upgrade your plastic caps with some style - Compatible with all Schrader valve tubes, including cars, motorcycles, wheelbarrows, tractors, and more - Weight: So light they will not register on our scale

Knurled aluminum body for better grip. = CNC Machined from 6061 T6 aluminum