BMX

The Profile Gun Drilled Hollow (GDH) 19mm Crank spindles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability. -Uses GDH Crank Tool. Older crank tools will not work. -Includes 6mm GDH CrMo crank bolts and aluminum flush washers. -The GDH CrMo axle has the same Limited Lifetime Warranty as the Race Cranks. 5.625" (For BMX Frames) Weight: 203g / 7.15oz 6" (For 68mm & 73mm external Euro BB’s, fits most DJ frames) Weight: 217g / 7.65oz

Chromoly 3/8" socket head bolts for use in any Profile BMX/MTB or Madera 3/8? threaded hub axle. -Bolts sold individually -Washers and cones not included -Use 8mm or 5/16' hex keys

-The Aegis Rear Hub Guard is Designed with today’s smaller dropouts in mind, it replaces the cone spacer on 3/8 hubs as well as the cone spacer and lock nut on 14mm hubs.-Fits all Profile Mini, Elite, and Totem Cassette hubs, as well as Madera V2 Cassette hubs. -The Aegis Front Hub Guard will fit on Profile Mini, Totem, and Elite front hubs, as well as the Madera Pilot V2 hub. It replaces the cone spacer. Priced Individually

BUTTON HEAD BOLTS are an upgrade to standard socket head(allen) bolt. They feature a smooth, rounded finish. There are three Button Head bolt styles available: 3/8" (10mm) bolt - will fit 3/8 drop outs. 3/8" (10mm) with 14mm step - will fit 14mm dropouts 3/8" with 14mm Dropout & Peg Step - The peg version, has a longer step with enough room for a 14mm peg.

REAR (DRIVE SIDE): -The Profile Racing C4 Drive Side Guard is made from injection molded plastic. -Must be used with the proprietary steel insert which threads on 14mm axle and substitutes existing drive side jam nut. -Can be used on all 14mm rear Profile and Madera Cassette Hubs (including Madera V-2 and Gulf Coaster, and Profile Mini, Totem, Elite, and Zcoaster). -Can be used on either RHD or LHD Hubs. -Works only with 14mm axles REAR: -CNC machined from Delrin (a really strong and durable plastic) -Can be used on Profile Elite, Mini ,Totem, and ZCoaster rear hubs as well Madera V2 Rear hub in 14mm Only. -Works only with Madera and Profile 14mm axles as the guard fits over the jam nut. Will NOT work with 3/8 hubs. -The hub guard slides over the 14mm jam nut – It will sit snug against your drop out and hub cone when the wheel is tightened down. FRONT: -CNC machined from Delrin (a really strong and durable plastic) -Can be used on Profile Elite & Mini front hubs as well as Madera Pilot front hubs. -Works only with Profile/Madera Knurled cones. Will NOT work with the older style, all aluminum front hub cones. -You can buy an adaptable cone with the guard if you don’t have the right one. -The hub guard slides over the hub cone – It will sit snug against your fork and hub cone when the wheel is tightened down. Note: Plastic wears faster than aluminum, especially when used on very rough surfaces. The Madera C-4 guards are intended to be used for ramp and light street.

Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. -For 1/8 width" chains. -Drivers include bearings & seals. -Pawls, springs, & cogs NOT included. -Drivers are RHD/LHD compatible.

Replacement bolts for all Profile BMX, Madera Bmx, and Profile MTB stems. PRICE IS PER BOLT

-Heat treated oversize 4130 chromoly crank arms-The strongest Profile has ever made! -22mm GDH CrMo axle with 8mm hex aluminum axle bolts -No boss only- spline drive sprocket must be used. -Column Crankset includes LH & RH crank arms, 22mm GDH chromo axle, aluminum axle bolts/washers, and Column Crank Tool.

Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. For use on Profile Racing Elite Cassette hubs.

-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 22mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. Supplied with 22mm splined steel insert. Weight: 25t: 78g/2.75oz 28t: 87g/3.05oz 30t: 96g/3.35oz NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though.

-For use with 19mm axle. Bottom Bracket kit includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)

-Profile Racing designed the Mini Cassette Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. This hub is LEFT SIDE DRIVE High/Low Flange Hubshell Standard BMX 110mm hub width It is important to also replace your chain whenever you install a new driver. A worn, stretched chain will cause your driver to wear out much faster.

-Profile Racing designed Mini Front Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. Low Flange hubshell Standard BMX 100mm hub width 3/8’s aluminum axle NOT intended for heavy street riding.

Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Cassette Axle also fits Totem, High Flange, & Madera cassette hubs.

This kit allows Profile Mini, Elite, High Flange, Totem, or Madera V2 hubs to be converted from 14mm axles to 3/8?(10mm) bolt on axles. Kit includes: -2 socket head bolts(3/8-16 thd)-Titanium upgrades available -2 volcano cones for bolts -2 steel 3/8? washers -2 cone spacers -1 threaded center axle(Chromoly)

-Kevlar base -Medium padding -Black seat with color stitched Profile Wing P Logo

-The “Push” stem is named after Mark Mulville's favorite trails. Reach: 48mm or 53mm Stack Height: 33mm Rise: 31.7mm (Upright) / 1.3mm (Invert) ***USES 1/4 ALLEN WRENCH***

-Press in style Spanish bottom brackets are for either 68mm or 73mm bottom bracket shells. -For use with 19mm axle. Bottom Bracket includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)

-Press in style Spanish bottom brackets are for either 68mm or 73mm bottom bracket shells. -For use with 22mm axle. Bottom Bracket includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)

-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 19mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. -Supplied with 19mm splined steel insert. NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though

Sprocket Spacer. Spider Adapter. Hat Washer. No matter what you call it, you probably need it to make your sprocket fit your crank axle properly. These go on the back side of the sprocket, and are made of steel. These are not actually needed for Profile bolt-on spiders, which fit flush on a 19mm crank axle.