Parts

The Merritt P1 Pedals are built with a low profile design that utilises a special nylon/fibreglass blend to increase strength and extend pedal life. Micro-knurling and molded pins across the pedal surface area increase grip and keep your feet planted.

The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm

Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster. TECH SPECS - Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster - Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands. - Weight: 1.5oz

Replacement cable hanger pivots for Kink Desist brakes.

Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.

The Ericsson seat features a classy, four-panel design, with a perforated vinyl top and sides with rugged rear panel. All black materials with black stitching are complemented only by a small woven tag at the rear of the seat. This seat also features extra thick foam padding and Stealth system for easy installation with a 5mm allen key. TECH SPECS - Size: Thick - Fabric: Heavy-Duty Vinyl - System: Stealth - Installation: 5mm Allen Key - Weight: 11.9oz

Removable Gryo Tabs - Fits all recent Kink complete bikes and aftermarket frames

Available in two different sizes, the Ideal bar ends give you some unique options. The standard size 31mm bar ends give you full-sized, traditional bar end and grip coverage. The smaller 22.2mm size, however, gives you just the bar end, which means your grip will actually cover up the bar end. This is great for catching barspins or grabbing the end of your bars since the bar ends will be fully covered by the soft rubber of your grips. Both sizes use a simple and lightweight three-piece wedge design, that installs with a common 6mm allen key. TECH SPECS - Sizes: Small 22.2mm / Standard 31mm - Material: 7075-T6 Aluminum - Mechanism: Expanding nylon wedge - Weight: Small 0.7oz / Standard 0.9oz

The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz

A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing. TECH SPECS - Size: Universal - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Lug: Multi-Length Trimmable Lug System - Weight: 3.4oz

The Master Clamp features a custom bolt design, that fits both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll still only need one allen key to adjust the entire seating setup. Beyond the bolt, the seat clamp is made from industry standard 6061-T6 aluminum and features a slim, low profile design. TECH SPECS - Material: 6061-T6 Aluminum - Installation: 5mm or 6mm Allen Key - Weight: 0.7oz

The Master Clamp bolt kit is a custom-designed nut and bolt set that works with most frames using integrated seat clamps and many traditional seat clamps as well. The bolt features a unique head design, that accommodates both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll only need one allen key to adjust the entire seating setup. TECH SPECS - Material: Hardened Steel - Installation: 5mm or 6mm Allen Key - Weight: 0.3oz

Kink bottom bracket kits include precision sealed bearings, machined dust cover cones, and all the spacers needed for perfect crank and chain alignment. The center tube spacer is a standard 51mm width so no additional internal spacers are needed, and on the off chance your frame requires a 48mm center spacer, it can be cut down using the cut guide machined into the spacer. TECH SPECS - Type: Mid - Material: 6061-T6 Aluminum - Bearings: Precision Sealed - Weight: 5.0oz(22mm)

The Kink Myriad Gyro features a fully CNC machined body, made from 6061-T6 aluminum. The low stack design increases cable pull, and the inner nylon bushing provides a smooth, maintenance-free spin. The Kink Myriad gyro uses a knarp-less design and works with most standard gyro cables. TECH SPECS - Material: 6061-T6 Aluminum - Bushing: Smooth nylon - Weight: 1.1oz

The Kink Gyro Plate is CNC machined from 6061-T6 aluminum, giving it a sleek and rigid design. The size is universal and will fit most modern (1 1/8") stems. This plate pairs perfectly with the Kink Myriad gyro, but will also work with other popular gyros on the market. TECH SPECS - Material: 6061-T6 Aluminum - Size: Universal - Weight: 0.4oz

New updated design! Leapfrogging off the original Pivotal seat system, the Stealth system offers a way to install your seat without fishing an allen key through the top patch. With the Stealth system, the need for a patch and slot on the seat is eliminated and the anchoring seat bolt can be threaded from the bottom using a Stealth seat post. Kink Stealth seat posts are made from a single, 3D-forged piece of 6061-T6 aluminum and are available in assorted lengths. Note: You can also use traditional Pivotal seats with Stealth seat posts. TECH SPECS - Length: Medium 180mm, Large 330mm - Diameter: 25.4mm - Material: 3D Forged 6061-T6 Aluminum - System: Stealth - Weight: Medium 4.1oz, Large 6.8oz

The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Lug: Unique, single, cast lever lug - Weight: 2.3oz

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap - Weight: 89g

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

In true DEITY fashion, the Crosshair Headset Cap exemplifies the style and detail you've come to expect from everything DEITY offers. We've included 3mm, 5mm, and 8mm spacers that are color-matched to create a clean refined option to finish off your cockpit. Not only are the cap and spacers machined from 6061 Aluminum, the bolt is CNC Machined from 7075 Aluminum to give you a precise and extremely durable centerpiece that is truly hassle-free. - Complete Aluminum 1 1/8" Headset Cap Kit - Features 7075 T6 Machined Aluminum Bolt - Includes 3mm, 5mm, and 8mm Spacers - Spacers Feature a Thin Profile For a Minimalist Style - Countersunk Bolt Design - Kit Includes the Star Nut - Weight: 13 grams (without star nut)

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Black

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Red

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

The FRISCO Pivotal Saddle joins patented Pivotal technology with DEITY unmatched styling, featuring old-school-inspired tuck 'n' roll detail on a new-school pivotal base to deliver the best of old and new. This playful yet timeless saddle gives you a super-light set up when partnered with our new PYSTON pivotal seatpost, now available in a longer length with a range of sizes in our signature two-tone polish and bead-blast finish. - Patented Pivotal technology - Vintage moto tuck 'n' roll styling - Mid-profile with additional padding - Featuring lightweight PU foam - Synthetic cover with subtle graphics - Intended use: DJ/ Slopestyle - 306 grams

The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. - 7075 T73 Gradient butted aluminum - Full bead blast finish for increased durability and fatigue resistance