Filter By:
- Bar Ends (1)
- BMX (49)
- Bottom Brackets (8)
- Brakes/Levers/Pads (16)
- Cables (10)
- Cassettes/Freewheels (3)
- Chainrings (5)
- Chains (5)
- Show More Categories
- Cranksets (6)
- Forks (4)
- Handlebar Grips/Tape (14)
- Handlebars (15)
- Headsets (6)
- Pedals (12)
- Saddles (12)
- Seatposts (5)
- Stems (7)
- Other (33)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$27.00
Emergency derailleur hanger is designed to temporarily replace a hanger that is damaged or broken on a ride. Anchored in place by the rear quick-release it allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried.
- Fits most frames that use a quick-release rear hub
- Provides nearly complete shifting range
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA

$32.99
TruVativ's Howitzer XR Bottom Bracket is built tough for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.

$14.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.

$19.99
Shimano M03 Metal Disc Brake Pads
- OEM pad for XT BR-M755 caliper
- Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

$12.99
The World's Best Freeride Mountain Biker and the World Leader in Grip Technology have teamed up to offer the Sensus Freeride grip. Designed by the reigning Red Bull Rampage winner, Cam Zink, for optimal feel and manufactured using ODI's proprietary grip compounds, the Sensus freeride grips provide a super soft feel without sacrificing control.
- Ribber pattern for comfort and control
- Constructed of our proprietary grip compound for comfort and durability
- Includes Sensus Push-In Plugs

$12.99
- Designed by Cameron Zink and manufactured using ODI's proprietary grip compounds
- 143mm length gives extra room for Freeride maneuvers
- Soft TPR material provides optimal feel and control

$263.99
Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power.
- Designed specifically for heavy-duty demands.
- Pivot bearing offers crisp lever feel and a fatigue-free ride.
- Metallic pads come standard for more power and longer wear.

$4.50
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

$119.99
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle.
- Crank arms forged from 6066 aluminum
- Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards
- Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations
- 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets
- CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation
- Bottom bracket sold separately

$74.99
Race Face Next SL Direct Mount Chainrings
• 7075-T6 aluminum, aerospace grade strength
• Compatible for 9, 10, and 11 speed
• Narrow Wide tooth profiling ensures ultimate chain retention
• Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease
• Utilizes Race Face proprietary spline design
• Stiff 4mm plate thickness to transfer loads without flexing
• 41 grams (26T) ranging up to 82 grams (36T)
• Compatible with Race Face cranks with CINCH system interface

$91.99
The Profile Gun Drilled Hollow (GDH) 19mm Crank spindles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability.
-Uses GDH Crank Tool. Older crank tools will not work.
-Includes 6mm GDH CrMo crank bolts and aluminum flush washers.
-The GDH CrMo axle has the same Limited Lifetime Warranty as the Race Cranks.
5.625" (For BMX Frames)
Weight: 203g / 7.15oz
6" (For 68mm & 73mm external Euro BB’s, fits most DJ frames)
Weight: 217g / 7.65oz

$9.99
Chromoly 3/8" socket head bolts for use in any Profile BMX/MTB or Madera 3/8? threaded hub axle.
-Bolts sold individually
-Washers and cones not included
-Use 8mm or 5/16' hex keys

$29.99
-The Aegis Rear Hub Guard is Designed with today’s smaller dropouts in mind, it replaces the cone spacer on 3/8 hubs as well as the cone spacer and lock nut on 14mm hubs.-Fits all Profile Mini, Elite, and Totem Cassette hubs, as well as Madera V2 Cassette hubs.
-The Aegis Front Hub Guard will fit on Profile Mini, Totem, and Elite front hubs, as well as the Madera Pilot V2 hub. It replaces the cone spacer.
Priced Individually

$21.99
BUTTON HEAD BOLTS are an upgrade to standard socket head(allen) bolt. They feature a smooth, rounded finish.
There are three Button Head bolt styles available:
3/8" (10mm) bolt - will fit 3/8 drop outs.
3/8" (10mm) with 14mm step - will fit 14mm dropouts
3/8" with 14mm Dropout & Peg Step - The peg version, has a
longer step with enough room for a 14mm peg.

$23.99 - $26.99
REAR (DRIVE SIDE):
-The Profile Racing C4 Drive Side Guard is made from injection molded plastic.
-Must be used with the proprietary steel insert which threads on 14mm axle and substitutes existing drive side jam nut.
-Can be used on all 14mm rear Profile and Madera Cassette Hubs (including Madera V-2 and Gulf Coaster, and Profile Mini, Totem, Elite, and Zcoaster).
-Can be used on either RHD or LHD Hubs.
-Works only with 14mm axles
REAR:
-CNC machined from Delrin (a really strong and durable plastic)
-Can be used on Profile Elite, Mini ,Totem, and ZCoaster rear hubs as well Madera V2 Rear hub in 14mm Only.
-Works only with Madera and Profile 14mm axles as the guard fits over the jam nut. Will NOT work with 3/8 hubs.
-The hub guard slides over the 14mm jam nut – It will sit snug against your drop out and hub cone when the wheel is tightened down.
FRONT:
-CNC machined from Delrin (a really strong and durable plastic)
-Can be used on Profile Elite & Mini front hubs as well as Madera Pilot front hubs.
-Works only with Profile/Madera Knurled cones. Will NOT work with the older style, all aluminum front hub cones.
-You can buy an adaptable cone with the guard if you don’t have the right one.
-The hub guard slides over the hub cone – It will sit snug against your fork and hub cone when the wheel is tightened down.
Note: Plastic wears faster than aluminum, especially when used on very rough surfaces. The Madera C-4 guards are intended to be used for ramp and light street.
$71.99
Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs.
-For 1/8 width" chains.
-Drivers include bearings & seals.
-Pawls, springs, & cogs NOT included.
-Drivers are RHD/LHD compatible.

$234.99
-Heat treated oversize 4130 chromoly crank arms-The strongest Profile has ever made!
-22mm GDH CrMo axle with 8mm hex aluminum axle bolts
-No boss only- spline drive sprocket must be used.
-Column Crankset includes LH & RH crank arms, 22mm GDH chromo axle, aluminum axle bolts/washers, and Column Crank Tool.

$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability.
For use on Profile Racing Elite Cassette hubs.

$67.99
-CNC machined from 7075 Aluminum in the USA!
-Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer.
-Available for 22mm splined axles only.
-1/8? tooth width for use with most freestyle/street & single speed chains.
Supplied with 22mm splined steel insert.
Weight:
25t: 78g/2.75oz
28t: 87g/3.05oz
30t: 96g/3.35oz
NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though.

$114.99 - $119.99
-The Profile Helm MTB stem is for Downhill, Freeride, and Enduro applications.
-31.8mm or 35mm bar clamp, and standard 1 1/8" steerer tube clamp.
-Stack Height: 20mm(.8?)
-0 degree rise
-Moto-Clamp front bolts (top two bolts fully tighten, bottom bolts to adjust clamp pressure).
-Made from fully CNC machined, 7075 Billet Aluminum. Stem body machined with radius and chamfered edges for a smooth finish.
-Anodized colors with laser etched graphics.
Sizes: 32mm ,40mm, 50mm, 60mm

$49.99
MAST TOP LOAD STEM
-“Top Load” style to get the handlebars up higher-33mm stack height.
-Made in America
-Available in 48mm and 53mm reach

$36.99
-For use with 19mm axle.
Bottom Bracket kit includes:
Bearings (2)
Tube spacer (1)
Color anodized cones (2)
5mm Tube spacer (1)
1/8' Thick spacer (1)
1/16' Thin spacer (1)

$45.99
-Press in style Mid bottom brackets are for either 68mm or 73mm bottom bracket shells.
-For use with 22mm axle.
Bottom Bracket includes:
Bearings (2)
Tube spacer (1)
Color anodized cones (2)
5mm Tube spacer (1)
3/16?‘ Thick spacer (1)
$224.99
-Profile Racing designed the Mini Cassette Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use.
This hub is LEFT SIDE DRIVE
High/Low Flange Hubshell
Standard BMX 110mm hub width
It is important to also replace your chain whenever you install a new driver. A worn, stretched chain will cause your driver to wear out much faster.

$119.99
-Profile Racing designed Mini Front Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use.
Low Flange hubshell
Standard BMX 100mm hub width
3/8’s aluminum axle NOT intended for heavy street riding.
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability.
14mm GDH Mini Cassette Axle also fits Totem, High Flange, & Madera cassette hubs.

$79.99
This kit allows Profile Mini, Elite, High Flange, Totem, or Madera V2 hubs to be converted from 14mm axles to 3/8?(10mm) bolt on axles.
Kit includes:
-2 socket head bolts(3/8-16 thd)-Titanium upgrades available
-2 volcano cones for bolts
-2 steel 3/8? washers
-2 cone spacers
-1 threaded center axle(Chromoly)

$66.99
-Includes LH & RH threaded cups, bearings(2), tube spacer, cone spacer, & aluminum/steel spacers.
-Bottom Bracket widths: 68mm, 73mm
-Installs with Park Tool BBT-9.

$75.99
-The “Push” stem is named after Mark Mulville's favorite trails.
Reach: 48mm or 53mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
***USES 1/4 ALLEN WRENCH***

$199.99
YOU MUST SPECIFY SPINDLE SIZE IN ORDER NOTES. IF YOU ARE UNSURE OF SIZING, PLEASE GIVE US A CALL!
SPINDLES ARE AVAILABLE IN 5 5/8" (BMX) & 6" (DJ) OPTIONS
*The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB.
-Crankset includes crank arms, 19mm GDH heat-treated CrMo axle, GDH CrMo axle bolts, flush washers, sprocket bolt, and crank installation/removal tool.
-Titanium upgrades available for axle, axle bolts, and sprocket bolt.
-Guide for 19mm axle lengths:
-5.625"(for Mid, American, Spanish, and internal Euro BB’s)
-6.0"(for 68mm & 73mm external Euro BB’s)
-BOTTOM BRACKET SOLD SEPARATELY
-Profile Racing offers a lifetime Warranty to original purchaser.

$45.99
-Press in style Spanish bottom brackets are for either 68mm or 73mm bottom bracket shells.
-For use with 22mm axle.
Bottom Bracket includes:
Bearings (2)
Tube spacer (1)
Color anodized cones (2)
5mm Tube spacer (1)
1/8' Thick spacer (1)
1/16' Thin spacer (1)

$67.99 - $79.99
-CNC machined from 7075 Aluminum in the USA!
-Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer.
-Available for 19mm splined axles only.
-1/8? tooth width for use with most freestyle/street & single speed chains.
-Supplied with 19mm splined steel insert.
NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though

$9.99
Sprocket Spacer. Spider Adapter. Hat Washer. No matter what you call it, you probably need it to make your sprocket fit your crank axle properly. These go on the back side of the sprocket, and are made of steel. These are not actually needed for Profile bolt-on spiders, which fit flush on a 19mm crank axle.
$359.99
-The Z Coaster® is a proprietary freecoaster style hub engineered, designed, & manufactured by Profile Racing. It essentially works as a spring/pawl cassette hub that can be disengaged into a freecoaster with varying slack options.
Highlights of the Z Coaster®:
The Z Coaster®’s Pawl is “Z” shaped to allow for engagement/disengagement by the center Slack Cam Ring. This allows for adjustable slack by being able to switch cam rings. The Z Coaster® has an outer driver support bearing for the oversized driver mechanism. This bearing supports the driver from the outside.
The Z Coaster®’s pawls and ratchet ring have a proprietary coating that offer smooth engagement.
RHD
36h
14mm male axle
Made in the USA at the Profile Racing factory.

$25.99
-Designed only for the Profile Z Coaster® and Madera Gulf Coaster Rear Hub (Non Drive Side)
-Compression fit into your drop-out as you tighten your wheel.
-Fits over the Non-Drive Jam Nut (Do not remove jam nut or cone)
**If needed, the Z Coaster® And Madera Gulf Coaster accepts the standard AEGIS DRIVE SIDE HUB GUARD**

$17.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm

$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

$8.00
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$29.99
Problem Solvers Cog & Carrier adapts multi-speed Shimano HG freehubs for singlespeed use.
- Wide-profile alloy cog carrier supports a single speed cog
- 6-bolt chromoly cog included, compatible with 3/32" and 1/8" chains
- Carrier is splined for Shimano HG freehub compatibility
- Additional cogs available separately

$6.00
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

$34.99
The Mike Aitken signature BMX seat is a stylish and durable, that's tear and scuff resistant.

$39.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach

$6.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible

$169.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

$119.99
The Seven K-A is a double wall rim that features 34mm width, 17mm height and is made from 7000 series aluminum.
- ERD: 390mm

$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
Page 1 of 4
Next page