Filter By:
- BMX (37)
- Bottom Brackets (5)
- Brakes/Levers/Pads (6)
- Cables (6)
- Cassettes/Freewheels (2)
- Chainrings (5)
- Chains (7)
- Cranksets (2)
- Show More Categories
- Forks (4)
- Handlebar Grips/Tape (7)
- Handlebars (5)
- Headsets (4)
- Pedals (7)
- Saddles (5)
- Seatposts (4)
- Stems (3)
- Other (17)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$54.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$84.99
The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style.
- 7075 T73 Gradient butted aluminum
- Full bead blast finish for increased durability and fatigue resistance
$21.99
The Twisted Pro pedal features a larger body shape, slimmer height and more concave.
- Loose-ball bearing
$11.99 - $12.99
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange!
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary Soft Grip compound for added comfort
- Increasingly popular with top athletes around the world
- Open ends with black and white Two Color Push In Plugs end plugs included
$6.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$35.00
KMC X12 chains feature a double X bridge shape for fast and smooth shifting.
- Compatible with SRAM 12-speed systems
- Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting
- Mushroom riveted pins for the highest pin power and allows shifting under heavy loads
- 1/2 x 11/128
- 126 Links
$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
$28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction
$24.99
Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster.
TECH SPECS
- Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster
- Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands.
- Weight: 1.5oz
$119.99
The Seven K-A is a double wall rim that features 34mm width, 17mm height and is made from 7000 series aluminum.
- ERD: 390mm
$29.99
Everything you'd want in a headset! The Lift Kit comes with 3mm, 8mm, and 18mm rise headset caps, giving your bike a super clean look and eliminating the need for additional spacers. Featuring two precision sealed Campy spec bearings (41.8mm x 45°), the Cinema Lift Kit provides long-lasting bearing life and smooth function.
- Cap Height: 3mm, 8mm, and 18mm
- Bearing Size: Campy Spec (41.8mm x 45°)
- Weight: 2.9 oz
$12.99
The Kink Gyro Plate is CNC machined from 6061-T6 aluminum, giving it a sleek and rigid design. The size is universal and will fit most modern (1 1/8") stems. This plate pairs perfectly with the Kink Myriad gyro, but will also work with other popular gyros on the market.
TECH SPECS
- Material: 6061-T6 Aluminum
- Size: Universal
- Weight: 0.4oz
$75.99
-The “Push” stem is named after Mark Mulville's favorite trails.
Reach: 48mm or 53mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
***USES 1/4 ALLEN WRENCH***
$67.99 - $79.99
-CNC machined from 7075 Aluminum in the USA!
-Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer.
-Available for 19mm splined axles only.
-1/8? tooth width for use with most freestyle/street & single speed chains.
-Supplied with 19mm splined steel insert.
NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$16.99
A Teflon coated 510 chain with heat-treated pins and thicker side plates, our 510 chains are built to last. Features a factory-installed half-link and master link.
Product Specifications
- Size: 1/8"
- Length: 100 Links
- Includes: Half-Link and Master-Link
- Weight: 14oz
$23.99
REAR (DRIVE SIDE):
-The Profile Racing C4 Drive Side Guard is made from injection molded plastic.
-Must be used with the proprietary steel insert which threads on 14mm axle and substitutes existing drive side jam nut.
-Can be used on all 14mm rear Profile and Madera Cassette Hubs (including Madera V-2 and Gulf Coaster, and Profile Mini, Totem, Elite, and Zcoaster).
-Can be used on either RHD or LHD Hubs.
-Works only with 14mm axles
REAR:
-CNC machined from Delrin (a really strong and durable plastic)
-Can be used on Profile Elite, Mini ,Totem, and ZCoaster rear hubs as well Madera V2 Rear hub in 14mm Only.
-Works only with Madera and Profile 14mm axles as the guard fits over the jam nut. Will NOT work with 3/8 hubs.
-The hub guard slides over the 14mm jam nut – It will sit snug against your drop out and hub cone when the wheel is tightened down.
FRONT:
-CNC machined from Delrin (a really strong and durable plastic)
-Can be used on Profile Elite & Mini front hubs as well as Madera Pilot front hubs.
-Works only with Profile/Madera Knurled cones. Will NOT work with the older style, all aluminum front hub cones.
-You can buy an adaptable cone with the guard if you don’t have the right one.
-The hub guard slides over the hub cone – It will sit snug against your fork and hub cone when the wheel is tightened down.
Note: Plastic wears faster than aluminum, especially when used on very rough surfaces. The Madera C-4 guards are intended to be used for ramp and light street.
$26.99
The signature Dak pegs feature a super strong chromoly core and a long-lasting nylon sleeve for smooth grinds on the roughest ledges and rails. The exclusive cog design increases the core's end thickness, making this peg even stronger than traditional plastic pegs while preventing the peg sleeve from rotating at the same time. With Dakota Roche's name on it, you know they can take a beating! Sold individually as a 14mm peg with a 3/8" adapter.
- Size: 14mm (3/8" adapter included)
- Length: 4.5" or 4.75"
- Diameter: 38mm
- Weight: 7.6 oz (4.5")
$11.99
The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
TECH SPECS
- Housing: Coated linear strand
- Wire: 1.5mm pre-stretched slick wire
- Length: 50"
- Lug: Traditional cast
- Weight: 2.5oz
$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$22.99
The stylish and affordable Nexus sprocket has a web spoke design CNC'd from 6061 aluminum, making an aesthetic yet highly functional lightweight sprocket!
- Material: 6061 aluminum
- Thickness: 5mm
- Spindle Bore: 15/16" (24mm)
- Weight: 1.8oz
$39.99
- Patented Pivotal Technology
- Forged, one-piece 6061 T6 aluminum
- Compatible with all Pivotal saddles
- 27.2mm Diameter for DJ MTB frames
- 200mm Length
- Two-tone bead blasted and polished anodized finish
- Weight: 112 grams
$25.99
-Designed only for the Profile Z Coaster® and Madera Gulf Coaster Rear Hub (Non Drive Side)
-Compression fit into your drop-out as you tighten your wheel.
-Fits over the Non-Drive Jam Nut (Do not remove jam nut or cone)
**If needed, the Z Coaster® And Madera Gulf Coaster accepts the standard AEGIS DRIVE SIDE HUB GUARD**
$4.99
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$21.99
BUTTON HEAD BOLTS are an upgrade to standard socket head(allen) bolt. They feature a smooth, rounded finish.
There are three Button Head bolt styles available:
3/8" (10mm) bolt - will fit 3/8 drop outs.
3/8" (10mm) with 14mm step - will fit 14mm dropouts
3/8" with 14mm Dropout & Peg Step - The peg version, has a
longer step with enough room for a 14mm peg.
$79.99
Merritt's new team model bars, the Andre were designed with a 12° backsweep and 2° upsweep for a generally comfortable feel that'll suit most riders.
Built from multi-butted, heat-treated chromoly with dual radius bends for increased strength and a 19mm crossbar for added rigidity
$12.99
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs.
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary grip compound for comfort and durability
- The grip of choice for top athletes around the globe
- Open ends with Thug Plug end plugs included
$59.99
Updated version of Merritt's trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach.
Page 1 of 4
Next page