Parts

-For use with 19mm axle. Bottom Bracket kit includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)

-Press in style Spanish bottom brackets are for either 68mm or 73mm bottom bracket shells. -For use with 19mm axle. Bottom Bracket includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)

The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

- Patented Pivotal Technology - Forged, one-piece 6061 T6 aluminum - Compatible with all Pivotal saddles - 27.2mm Diameter for DJ MTB frames - 200mm Length - Two-tone bead blasted and polished anodized finish - Weight: 112 grams

The Merritt Brandon Begin Signature Hemp Seat features a lightweight design and a hemp cover material. Available in slim or fat. Easy top tool access and a simple and to-the-point logo round things out to create an awesome aftermarket pivotal seat. Fit: Pivotal

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

-Press in style Mid bottom brackets are for either 68mm or 73mm bottom bracket shells. -For use with 22mm axle. Bottom Bracket includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 3/16?‘ Thick spacer (1)

-Press in style Spanish bottom brackets are for either 68mm or 73mm bottom bracket shells. -For use with 22mm axle. Bottom Bracket includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)

The FRISCO Pivotal Saddle joins patented Pivotal technology with DEITY unmatched styling, featuring old-school-inspired tuck 'n' roll detail on a new-school pivotal base to deliver the best of old and new. This playful yet timeless saddle gives you a super-light set up when partnered with our new PYSTON pivotal seatpost, now available in a longer length with a range of sizes in our signature two-tone polish and bead-blast finish. - Patented Pivotal technology - Vintage moto tuck 'n' roll styling - Mid-profile with additional padding - Featuring lightweight PU foam - Synthetic cover with subtle graphics - Intended use: DJ/ Slopestyle - 306 grams

MAST TOP LOAD STEM -“Top Load” style to get the handlebars up higher-33mm stack height. -Made in America -Available in 48mm and 53mm reach

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

Updated version of Merritt's trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach.

Updated version of our trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach. Weight: 11.1 oz.

Wider and beefier with and improved clamping area and recessed compression bolt for a clean look. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load

-Includes LH & RH threaded cups, bearings(2), tube spacer, cone spacer, & aluminum/steel spacers. -Bottom Bracket widths: 68mm, 73mm -Installs with Park Tool BBT-9.

-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 22mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. Supplied with 22mm splined steel insert. Weight: 25t: 78g/2.75oz 28t: 87g/3.05oz 30t: 96g/3.35oz NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though.

-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 19mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. -Supplied with 19mm splined steel insert. NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. -For 1/8 width" chains. -Drivers include bearings & seals. -Pawls, springs, & cogs NOT included. -Drivers are RHD/LHD compatible.

The Trailmix pedal featres a lighter body, bigger windows and a trail-inspired shape and pin lengths. - Aluminum body

-The “Push” stem is named after Mark Mulville's favorite trails. Reach: 48mm or 53mm Stack Height: 33mm Rise: 31.7mm (Upright) / 1.3mm (Invert) ***USES 1/4 ALLEN WRENCH***

As the name suggests, the Williams bars are Nathan Williams' signature handlebars and feature all his preferred geometry. The 9.25" rise is a traditional height, without being either too tall or too short. The unique 1.5-degree upsweep is just slightly up from most traditional bars, and the 11-degree back sweep is slightly less, creating Nathan's preferred feel. The 13-butted chromoly tubing construction, and TruTherm post-weld heat treatment process ensure these bars have no problems standing up to Nathan's insane level of riding. TECH SPECS - Rise: 9.25-inches - Width: 29-inches - Backsweep: 11 Degrees - Upsweep: 1.5 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 27.8oz

Merritt's new team model bars, the Andre were designed with a 12° backsweep and 2° upsweep for a generally comfortable feel that'll suit most riders. Built from multi-butted, heat-treated chromoly with dual radius bends for increased strength and a 19mm crossbar for added rigidity

Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. For use on Profile Racing Elite Cassette hubs.

Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Cassette Axle also fits Totem, High Flange, & Madera cassette hubs.

The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. - 7075 T73 Gradient butted aluminum - Full bead blast finish for increased durability and fatigue resistance

Deity's collaboration with global saddle leader SDG Components. An SDG base topped with a Deity foam mold, the Speedtrap uses the highest-quality mid-density EVA foam for resilient durability, a soft synthetic cover for minimal wear, and high-end Kevlar sides to protect your seat while giving you the grip where you need it. - Hollow chromoly rails - Highest-quality mid-density EVA foam - Highest-quality Kevlar sides with embossed synthetic cover - D2 edge flex - provides softened edges for optimal pedal strokes - Length: 280mm - Width: 140mm - Weight: 241g

The Profile Gun Drilled Hollow (GDH) 19mm Crank spindles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability. -Uses GDH Crank Tool. Older crank tools will not work. -Includes 6mm GDH CrMo crank bolts and aluminum flush washers. -The GDH CrMo axle has the same Limited Lifetime Warranty as the Race Cranks. 5.625" (For BMX Frames) Weight: 203g / 7.15oz 6" (For 68mm & 73mm external Euro BB’s, fits most DJ frames) Weight: 217g / 7.65oz

Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange