Filter By:
- BMX (36)
- Bottom Brackets (5)
- Brakes/Levers/Pads (7)
- Cables (8)
- Cassettes/Freewheels (2)
- Chainrings (5)
- Chains (7)
- Cranksets (4)
- Show More Categories
- Forks (4)
- Handlebar Grips/Tape (6)
- Handlebars (3)
- Headsets (4)
- Pedals (6)
- Saddles (6)
- Seatposts (3)
- Stems (4)
- Other (16)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
$4.50
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes
$4.99
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$21.00
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain.
- Designed to be used with Eagle chain
- Material: Steel
$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings.
- New graphics package for a fresh, premium look
- Proven Charger damper with specific Dirt Jumping/Slopestyle tune
- Specific Solo Air top cap for extra bottom-out progression
- Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g
$91.99
The Profile Gun Drilled Hollow (GDH) 19mm Crank spindles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability.
-Uses GDH Crank Tool. Older crank tools will not work.
-Includes 6mm GDH CrMo crank bolts and aluminum flush washers.
-The GDH CrMo axle has the same Limited Lifetime Warranty as the Race Cranks.
5.625" (For BMX Frames)
Weight: 203g / 7.15oz
6" (For 68mm & 73mm external Euro BB’s, fits most DJ frames)
Weight: 217g / 7.65oz
$9.99
Chromoly 3/8" socket head bolts for use in any Profile BMX/MTB or Madera 3/8? threaded hub axle.
-Bolts sold individually
-Washers and cones not included
-Use 8mm or 5/16' hex keys
$29.99
-The Aegis Rear Hub Guard is Designed with today’s smaller dropouts in mind, it replaces the cone spacer on 3/8 hubs as well as the cone spacer and lock nut on 14mm hubs.-Fits all Profile Mini, Elite, and Totem Cassette hubs, as well as Madera V2 Cassette hubs.
-The Aegis Front Hub Guard will fit on Profile Mini, Totem, and Elite front hubs, as well as the Madera Pilot V2 hub. It replaces the cone spacer.
Priced Individually
$21.99
BUTTON HEAD BOLTS are an upgrade to standard socket head(allen) bolt. They feature a smooth, rounded finish.
There are three Button Head bolt styles available:
3/8" (10mm) bolt - will fit 3/8 drop outs.
3/8" (10mm) with 14mm step - will fit 14mm dropouts
3/8" with 14mm Dropout & Peg Step - The peg version, has a
longer step with enough room for a 14mm peg.
$71.99 - $75.99
Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs.
-For 1/8 width" chains.
-Drivers include bearings & seals.
-Pawls, springs, & cogs NOT included.
-Drivers are RHD/LHD compatible.
$4.99
Replacement bolts for all Profile BMX, Madera Bmx, and Profile MTB stems.
PRICE IS PER BOLT
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability.
For use on Profile Racing Elite Cassette hubs.
$67.99
-CNC machined from 7075 Aluminum in the USA!
-Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer.
-Available for 22mm splined axles only.
-1/8? tooth width for use with most freestyle/street & single speed chains.
Supplied with 22mm splined steel insert.
Weight:
25t: 78g/2.75oz
28t: 87g/3.05oz
30t: 96g/3.35oz
NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though.
$114.99 - $119.99
-The Profile Helm MTB stem is for Downhill, Freeride, and Enduro applications.
-31.8mm or 35mm bar clamp, and standard 1 1/8" steerer tube clamp.
-Stack Height: 20mm(.8?)
-0 degree rise
-Moto-Clamp front bolts (top two bolts fully tighten, bottom bolts to adjust clamp pressure).
-Made from fully CNC machined, 7075 Billet Aluminum. Stem body machined with radius and chamfered edges for a smooth finish.
-Anodized colors with laser etched graphics.
Sizes: 32mm ,40mm, 50mm, 60mm
$36.99
-For use with 19mm axle.
Bottom Bracket kit includes:
Bearings (2)
Tube spacer (1)
Color anodized cones (2)
5mm Tube spacer (1)
1/8' Thick spacer (1)
1/16' Thin spacer (1)
$224.99
-Profile Racing designed the Mini Cassette Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use.
This hub is LEFT SIDE DRIVE
High/Low Flange Hubshell
Standard BMX 110mm hub width
It is important to also replace your chain whenever you install a new driver. A worn, stretched chain will cause your driver to wear out much faster.
$119.99
-Profile Racing designed Mini Front Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use.
Low Flange hubshell
Standard BMX 100mm hub width
3/8’s aluminum axle NOT intended for heavy street riding.
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability.
14mm GDH Mini Cassette Axle also fits Totem, High Flange, & Madera cassette hubs.
$66.99
-Includes LH & RH threaded cups, bearings(2), tube spacer, cone spacer, & aluminum/steel spacers.
-Bottom Bracket widths: 68mm, 73mm
-Installs with Park Tool BBT-9.
$45.99
-Kevlar base
-Medium padding
-Black seat with color stitched Profile Wing P Logo
$75.99
-The “Push” stem is named after Mark Mulville's favorite trails.
Reach: 48mm or 53mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
***USES 1/4 ALLEN WRENCH***
$199.99
YOU MUST SPECIFY SPINDLE SIZE IN ORDER NOTES. IF YOU ARE UNSURE OF SIZING, PLEASE GIVE US A CALL!
SPINDLES ARE AVAILABLE IN 5 5/8" (BMX) & 6" (DJ) OPTIONS
*The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB.
-Crankset includes crank arms, 19mm GDH heat-treated CrMo axle, GDH CrMo axle bolts, flush washers, sprocket bolt, and crank installation/removal tool.
-Titanium upgrades available for axle, axle bolts, and sprocket bolt.
-Guide for 19mm axle lengths:
-5.625"(for Mid, American, Spanish, and internal Euro BB’s)
-6.0"(for 68mm & 73mm external Euro BB’s)
-BOTTOM BRACKET SOLD SEPARATELY
-Profile Racing offers a lifetime Warranty to original purchaser.
$67.99 - $79.99
-CNC machined from 7075 Aluminum in the USA!
-Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer.
-Available for 19mm splined axles only.
-1/8? tooth width for use with most freestyle/street & single speed chains.
-Supplied with 19mm splined steel insert.
NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though
$9.99
Sprocket Spacer. Spider Adapter. Hat Washer. No matter what you call it, you probably need it to make your sprocket fit your crank axle properly. These go on the back side of the sprocket, and are made of steel. These are not actually needed for Profile bolt-on spiders, which fit flush on a 19mm crank axle.
$359.99
-The Z Coaster® is a proprietary freecoaster style hub engineered, designed, & manufactured by Profile Racing. It essentially works as a spring/pawl cassette hub that can be disengaged into a freecoaster with varying slack options.
Highlights of the Z Coaster®:
The Z Coaster®’s Pawl is “Z” shaped to allow for engagement/disengagement by the center Slack Cam Ring. This allows for adjustable slack by being able to switch cam rings. The Z Coaster® has an outer driver support bearing for the oversized driver mechanism. This bearing supports the driver from the outside.
The Z Coaster®’s pawls and ratchet ring have a proprietary coating that offer smooth engagement.
RHD
36h
14mm male axle
Made in the USA at the Profile Racing factory.
$25.99
-Designed only for the Profile Z Coaster® and Madera Gulf Coaster Rear Hub (Non Drive Side)
-Compression fit into your drop-out as you tighten your wheel.
-Fits over the Non-Drive Jam Nut (Do not remove jam nut or cone)
**If needed, the Z Coaster® And Madera Gulf Coaster accepts the standard AEGIS DRIVE SIDE HUB GUARD**
$17.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
$38.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform.
- 17mm thick at center
- 105mm wide
- Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$6.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$159.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$119.99
The Seven K-A is a double wall rim that features 34mm width, 17mm height and is made from 7000 series aluminum.
- ERD: 390mm
$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$72.99
The Trailmix pedal featres a lighter body, bigger windows and a trail-inspired shape and pin lengths.
- Aluminum body
$12.99
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange!
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary Soft Grip compound for added comfort
- Increasingly popular with top athletes around the world
- Open ends with black and white Two Color Push In Plugs end plugs included
$14.30
- Made from ODI proprietary soft compound material
- Classic Ribbed design provides improved vibration dampening
- 160mm Length
- Push-in style end plug
- Handlebar Diameter: 22.2mm
$12.99
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs.
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary grip compound for comfort and durability
- The grip of choice for top athletes around the globe
- Open ends with Thug Plug end plugs included
$10.95
The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length!
PRODUCT FEATURES:
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary grip SOFT compound for added comfort!
- Increasingly popular with top athletes around the world
- Open ends with Push In Plugs end plugs included
- Sold In Pairs
- 160mm
$16.99
A Teflon coated 510 chain with heat-treated pins and thicker side plates, our 510 chains are built to last. Features a factory-installed half-link and master link.
Product Specifications
- Size: 1/8"
- Length: 100 Links
- Includes: Half-Link and Master-Link
- Weight: 14oz
$34.99 - $39.99
Includes two precision sealed bearings, aluminum cups, high-density plastic cone spacers, center tube spacer, sprocket adapter, and plenty of adjustment washers.
Product Specifications
- Type: American
- Bearings: Sealed
- Includes: Cups, Bearings, Cones, Spacer, Washers
- Weight: 10.5oz
$12.99
Made from super-stiff forged aluminum. Features a two-finger design lever for comfort and a hinged clamp for easy installation and removal. Available in multiple colors!
Product Specifications
- Size: 7/8" (22.2mm)
- Bracket: Hinged
- Material: Forged Aluminum
- Side: Right (Rear) or Left (Front)
- Weight: 3.4oz
$18.99
Made from industry-standard diecast aluminum, featuring extra-wide brake arm bends for large tire clearance and low-profile spring adjustment caps for universal functionality. Includes a simple one-piece straddle cable hanger system, brake pads, and all necessary hardware. The updated V2 design gives additional clearance, and the flat brake arm profiles eliminate any chance of brake arm rub.
Product Specifications
- Type: 990 U-Brake
- Material: Die-Cast Aluminum
- Includes: Brakes, Bolts, Pads, Straddle Cable
- Weight: 5.9oz
$4.99
Replacement spindle bolt that fits Mission Transit cranks and many other cranks.
Product Specifications
- Thread: M8 x P1.0
- Allen Key: 6mm
- Includes: 1 Bolt
- Weight: 0.6oz
$44.99
This European type bottom bracket features four sealed cartridge bearings inside threaded aluminum bearing cups. Includes center tube spacer and plenty of adjustment washers.
Product Specifications
- Type: Euro
- Bearings: 4x Sealed
- Includes: Cups, Bearings, Spacer, Washers
- Weight: 3.8oz
$22.99
The stylish and affordable Nexus sprocket has a web spoke design CNC'd from 6061 aluminum, making an aesthetic yet highly functional lightweight sprocket!
- Material: 6061 aluminum
- Thickness: 5mm
- Spindle Bore: 15/16" (24mm)
- Weight: 1.8oz
$1.99
A quality 265mm-long straddle cable with lugs on both ends. Works with most modern 990 style brakes.
Product Specifications
- Length: 265mm
- Weight: 0.1oz
$59.99
The best bang for your buck! The Transit V2 cranks are tubular Chromoly 3pc cranks with a super strong cold forged 19mm spindle. Plus, they're right and left-hand drive compatible.
- Material: Seamless 4130 Chromoly Tubing
- Spindle: 19mm 8-Spline Cold-Forged Chromoly
- Compatibility: Right and Left-Side Drive
- Pedal: 9/16"
- Weight: 2lb 6oz
$79.99
Merritt's new team model bars, the Andre were designed with a 12° backsweep and 2° upsweep for a generally comfortable feel that'll suit most riders.
Built from multi-butted, heat-treated chromoly with dual radius bends for increased strength and a 19mm crossbar for added rigidity
$39.99 - $41.99
The Merritt Brandon Begin Signature Hemp Seat features a lightweight design and a hemp cover material. Available in slim or fat.
Easy top tool access and a simple and to-the-point logo round things out to create an awesome aftermarket pivotal seat.
Fit: Pivotal
$59.99
Updated version of our trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach. Weight: 11.1 oz.
$19.99
The Merritt P1 Pedals are built with a low profile design that utilises a special nylon/fibreglass blend to increase strength and extend pedal life.
Micro-knurling and molded pins across the pedal surface area increase grip and keep your feet planted.
$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard.
- Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end
- Legendary Bomber durability with 36mm stanchions
- Buttery and easy-to-use GRIP damper
- Tapered steerer tube for maximum stiffness
- Adapters available for 15 x 100mm axle
- 1.5 Tapered steerer
- Offset: 37mm
$24.99
Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster.
TECH SPECS
- Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster
- Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands.
- Weight: 1.5oz
$8.99
Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.
$34.99
The Ericsson seat features a classy, four-panel design, with a perforated vinyl top and sides with rugged rear panel. All black materials with black stitching are complemented only by a small woven tag at the rear of the seat. This seat also features extra thick foam padding and Stealth system for easy installation with a 5mm allen key.
TECH SPECS
- Size: Thick
- Fabric: Heavy-Duty Vinyl
- System: Stealth
- Installation: 5mm Allen Key
- Weight: 11.9oz
$8.99
Removable Gryo Tabs
- Fits all recent Kink complete bikes and aftermarket frames
Page 1 of 2
Next page