Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm
$359.99
-The Z Coaster® is a proprietary freecoaster style hub engineered, designed, & manufactured by Profile Racing. It essentially works as a spring/pawl cassette hub that can be disengaged into a freecoaster with varying slack options. Highlights of the Z Coaster®: The Z Coaster®’s Pawl is “Z” shaped to allow for engagement/disengagement by the center Slack Cam Ring. This allows for adjustable slack by being able to switch cam rings. The Z Coaster® has an outer driver support bearing for the oversized driver mechanism. This bearing supports the driver from the outside. The Z Coaster®’s pawls and ratchet ring have a proprietary coating that offer smooth engagement. RHD 36h 14mm male axle Made in the USA at the Profile Racing factory.
$224.99
-Profile Racing designed the Mini Cassette Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. This hub is LEFT SIDE DRIVE High/Low Flange Hubshell Standard BMX 110mm hub width It is important to also replace your chain whenever you install a new driver. A worn, stretched chain will cause your driver to wear out much faster.
$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.
$159.99
The Hawk 22mm cranks are fully heat-treated and feature 4130 chromoly crank arms made with custom forged tubing, investment cast oversize spindle bosses, and a wraparound spindle gusset for increased strength and rigidity. A 22mm hollow chromoly spindle and hollow chromoly spindle bolts helps shed weight without sacrificing strength. - RHD/LHD compatible - Bore: 22 - Spindle Material: Steel - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No
$119.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included
$114.99 - $119.99
-The Profile Helm MTB stem is for Downhill, Freeride, and Enduro applications. -31.8mm or 35mm bar clamp, and standard 1 1/8" steerer tube clamp. -Stack Height: 20mm(.8?) -0 degree rise -Moto-Clamp front bolts (top two bolts fully tighten, bottom bolts to adjust clamp pressure). -Made from fully CNC machined, 7075 Billet Aluminum. Stem body machined with radius and chamfered edges for a smooth finish. -Anodized colors with laser etched graphics. Sizes: 32mm ,40mm, 50mm, 60mm
$119.99
-Profile Racing designed Mini Front Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. Low Flange hubshell Standard BMX 100mm hub width 3/8’s aluminum axle NOT intended for heavy street riding.
$119.99
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately
$104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform
$93.99
- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$91.99
The Profile Gun Drilled Hollow (GDH) 19mm Crank spindles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability. -Uses GDH Crank Tool. Older crank tools will not work. -Includes 6mm GDH CrMo crank bolts and aluminum flush washers. -The GDH CrMo axle has the same Limited Lifetime Warranty as the Race Cranks. 5.625" (For BMX Frames) Weight: 203g / 7.15oz 6" (For 68mm & 73mm external Euro BB’s, fits most DJ frames) Weight: 217g / 7.65oz
$89.99
DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars. - Intended use: Enduro and DH
$89.99
When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams
$89.99
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)
$84.99
The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. - 7075 T73 Gradient butted aluminum - Full bead blast finish for increased durability and fatigue resistance
$84.99
The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. - 7075 T73 Gradient butted aluminum - Full bead blast finish for increased durability and fatigue resistance
$79.99
The real deal, the Reel full guard sprocket. CNC machined from super thick 7075-T6 aluminum, the Reel sprocket will hold up to sprocket chunks and crank arm grinds while protecting your chain at the same time. Extensive machining not only reduces the weight but adds plenty of crank arm clearance. - Material: 7075-T6 Aluminum - Thickness: 13.8mm Overall (7mm at Spindle) - Type: Bolt Drive - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 4.6oz (25T)
$79.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap - Weight: 89g
$79.99
Dan Coller's signature Contender bars are perfect for taller riders, coming in at a comfortable 9.75" rise. The Contender bars are the first set of bars from Kink to offer pre-defined cutting grooves at 0.25" intervals. Coming with a stock 29.5" width, they can easily be cut down to 29", 28.5", 28" or 27.5" without breaking out the tape measure. Made from 13-butted chromoly tubing, and our TruTherm post-weld heat treatment process ensures these bars can stand up to all kinds of riding. Being ridden and trusted by Dan Coller daily attests to the Contender bars' strength. TECH SPECS - Rise: 9.75-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 28.6oz
$79.99
Merritt's new team model bars, the Andre were designed with a 12° backsweep and 2° upsweep for a generally comfortable feel that'll suit most riders. Built from multi-butted, heat-treated chromoly with dual radius bends for increased strength and a 19mm crossbar for added rigidity
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. For use on Profile Racing Elite Cassette hubs.
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Cassette Axle also fits Totem, High Flange, & Madera cassette hubs.
$79.99
This kit allows Profile Mini, Elite, High Flange, Totem, or Madera V2 hubs to be converted from 14mm axles to 3/8?(10mm) bolt on axles. Kit includes: -2 socket head bolts(3/8-16 thd)-Titanium upgrades available -2 volcano cones for bolts -2 steel 3/8? washers -2 cone spacers -1 threaded center axle(Chromoly)
$71.99 - $75.99
Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. -For 1/8 width" chains. -Drivers include bearings & seals. -Pawls, springs, & cogs NOT included. -Drivers are RHD/LHD compatible.
$75.99
-The “Push” stem is named after Mark Mulville's favorite trails. Reach: 48mm or 53mm Stack Height: 33mm Rise: 31.7mm (Upright) / 1.3mm (Invert) ***USES 1/4 ALLEN WRENCH***
$72.99
The Trailmix pedal featres a lighter body, bigger windows and a trail-inspired shape and pin lengths. - Aluminum body
$67.99
-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 22mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. Supplied with 22mm splined steel insert. Weight: 25t: 78g/2.75oz 28t: 87g/3.05oz 30t: 96g/3.35oz NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though.
$67.99
-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 19mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. -Supplied with 19mm splined steel insert. NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though
Page 1 of 5 Next page