Parts

Replacement cable hanger pivots for Kink Desist brakes.

Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.

The Ericsson seat features a classy, four-panel design, with a perforated vinyl top and sides with rugged rear panel. All black materials with black stitching are complemented only by a small woven tag at the rear of the seat. This seat also features extra thick foam padding and Stealth system for easy installation with a 5mm allen key. TECH SPECS - Size: Thick - Fabric: Heavy-Duty Vinyl - System: Stealth - Installation: 5mm Allen Key - Weight: 11.9oz

Removable Gryo Tabs - Fits all recent Kink complete bikes and aftermarket frames

The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz

A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing. TECH SPECS - Size: Universal - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Lug: Multi-Length Trimmable Lug System - Weight: 3.4oz

The Master Clamp bolt kit is a custom-designed nut and bolt set that works with most frames using integrated seat clamps and many traditional seat clamps as well. The bolt features a unique head design, that accommodates both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll only need one allen key to adjust the entire seating setup. TECH SPECS - Material: Hardened Steel - Installation: 5mm or 6mm Allen Key - Weight: 0.3oz

Kink bottom bracket kits include precision sealed bearings, machined dust cover cones, and all the spacers needed for perfect crank and chain alignment. The center tube spacer is a standard 51mm width so no additional internal spacers are needed, and on the off chance your frame requires a 48mm center spacer, it can be cut down using the cut guide machined into the spacer. TECH SPECS - Type: Mid - Material: 6061-T6 Aluminum - Bearings: Precision Sealed - Weight: 5.0oz(22mm)

The Kink Myriad Gyro features a fully CNC machined body, made from 6061-T6 aluminum. The low stack design increases cable pull, and the inner nylon bushing provides a smooth, maintenance-free spin. The Kink Myriad gyro uses a knarp-less design and works with most standard gyro cables. TECH SPECS - Material: 6061-T6 Aluminum - Bushing: Smooth nylon - Weight: 1.1oz

The Kink Gyro Plate is CNC machined from 6061-T6 aluminum, giving it a sleek and rigid design. The size is universal and will fit most modern (1 1/8") stems. This plate pairs perfectly with the Kink Myriad gyro, but will also work with other popular gyros on the market. TECH SPECS - Material: 6061-T6 Aluminum - Size: Universal - Weight: 0.4oz

New updated design! Leapfrogging off the original Pivotal seat system, the Stealth system offers a way to install your seat without fishing an allen key through the top patch. With the Stealth system, the need for a patch and slot on the seat is eliminated and the anchoring seat bolt can be threaded from the bottom using a Stealth seat post. Kink Stealth seat posts are made from a single, 3D-forged piece of 6061-T6 aluminum and are available in assorted lengths. Note: You can also use traditional Pivotal seats with Stealth seat posts. TECH SPECS - Length: Medium 180mm, Large 330mm - Diameter: 25.4mm - Material: 3D Forged 6061-T6 Aluminum - System: Stealth - Weight: Medium 4.1oz, Large 6.8oz

The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Lug: Unique, single, cast lever lug - Weight: 2.3oz

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap - Weight: 89g

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

- Cam Zink designed bars with unique upsweep and backsweep - 9.5 deg bend x 4.5 deg upsweep - Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail - Made from custom gradient butted 7075 T6 aluminum - 800mm wide, 31.8mm clamp - Third party online sales strictly prohibited by manufacturer

In true DEITY fashion, the Crosshair Headset Cap exemplifies the style and detail you've come to expect from everything DEITY offers. We've included 3mm, 5mm, and 8mm spacers that are color-matched to create a clean refined option to finish off your cockpit. Not only are the cap and spacers machined from 6061 Aluminum, the bolt is CNC Machined from 7075 Aluminum to give you a precise and extremely durable centerpiece that is truly hassle-free. - Complete Aluminum 1 1/8" Headset Cap Kit - Features 7075 T6 Machined Aluminum Bolt - Includes 3mm, 5mm, and 8mm Spacers - Spacers Feature a Thin Profile For a Minimalist Style - Countersunk Bolt Design - Kit Includes the Star Nut - Weight: 13 grams (without star nut)

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Black

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 36.4mm, Red

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

The FRISCO Pivotal Saddle joins patented Pivotal technology with DEITY unmatched styling, featuring old-school-inspired tuck 'n' roll detail on a new-school pivotal base to deliver the best of old and new. This playful yet timeless saddle gives you a super-light set up when partnered with our new PYSTON pivotal seatpost, now available in a longer length with a range of sizes in our signature two-tone polish and bead-blast finish. - Patented Pivotal technology - Vintage moto tuck 'n' roll styling - Mid-profile with additional padding - Featuring lightweight PU foam - Synthetic cover with subtle graphics - Intended use: DJ/ Slopestyle - 306 grams

The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. - 7075 T73 Gradient butted aluminum - Full bead blast finish for increased durability and fatigue resistance

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

- Patented Pivotal Technology - Forged, one-piece 6061 T6 aluminum - Compatible with all Pivotal saddles - 27.2mm Diameter for DJ MTB frames - 200mm Length - Two-tone bead blasted and polished anodized finish - Weight: 112 grams

DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars. - Intended use: Enduro and DH

DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

Deity's collaboration with global saddle leader SDG Components. An SDG base topped with a Deity foam mold, the Speedtrap uses the highest-quality mid-density EVA foam for resilient durability, a soft synthetic cover for minimal wear, and high-end Kevlar sides to protect your seat while giving you the grip where you need it. - Hollow chromoly rails - Highest-quality mid-density EVA foam - Highest-quality Kevlar sides with embossed synthetic cover - D2 edge flex - provides softened edges for optimal pedal strokes - Length: 280mm - Width: 140mm - Weight: 241g

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

Chad Kerley's signature CK pedals feature a comfortable concaved body design, with 12 molded pins per side and micro knurling across the entire surface for added traction. The pedal bodies are injection molded from a tough nylon fiberglass blend, spinning on a durable full Chromoly spindle. Embossed end caps feature the CK signature logo, and feature a unique removal slot should the pedal need to be tightened or greased. - Spindle Size: 9/16" - Spindle Material: Heat Treated Chromoly Steel - Body Material: Nylon and Fiberglass Blend - Traction Pins: 12 per Side - Installation: 15mm Pedal Wrench / 6mm Allen Key - Weight: 1.2oz

The signature Dak pegs feature a super strong chromoly core and a long-lasting nylon sleeve for smooth grinds on the roughest ledges and rails. The exclusive cog design increases the core's end thickness, making this peg even stronger than traditional plastic pegs while preventing the peg sleeve from rotating at the same time. With Dakota Roche's name on it, you know they can take a beating! Sold individually as a 14mm peg with a 3/8" adapter. - Size: 14mm (3/8" adapter included) - Length: 4.5" or 4.75" - Diameter: 38mm - Weight: 7.6 oz (4.5")

Everything you'd want in a headset! The Lift Kit comes with 3mm, 8mm, and 18mm rise headset caps, giving your bike a super clean look and eliminating the need for additional spacers. Featuring two precision sealed Campy spec bearings (41.8mm x 45°), the Cinema Lift Kit provides long-lasting bearing life and smooth function. - Cap Height: 3mm, 8mm, and 18mm - Bearing Size: Campy Spec (41.8mm x 45°) - Weight: 2.9 oz

The real deal, the Reel full guard sprocket. CNC machined from super thick 7075-T6 aluminum, the Reel sprocket will hold up to sprocket chunks and crank arm grinds while protecting your chain at the same time. Extensive machining not only reduces the weight but adds plenty of crank arm clearance. - Material: 7075-T6 Aluminum - Thickness: 13.8mm Overall (7mm at Spindle) - Type: Bolt Drive - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 4.6oz (25T)

The Cinema Tilt pedals feature a zero offset design keeping weight more evenly distributed over the spindle, resulting in better contact between your shoe and the pedal body. Micro-knurled surfaces and 16 molded traction pins per side ensure plenty of grip. The slim pedal body profiles are made from a super tough nylon fiberglass blend, and spin on a heat treated chromoly spindle.

Timeless styling is what the Waxed Canvas Stealth seat is designed around. A durable waxed-canvas main panel with tonal-embroidered Cinema logo is coupled with a color-matched faux-leather rear panel and finished with contrasting Cinema red stitching and an embroidered folded seam tag. - Size: Thick - Material: Waxed-Canvas Top, Faux-Leather Rear - System: Stealth - Installation: 5mm Allen Key - Weight: 11.8 oz

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

- The Lift has a similar overall width to the wider Trailmaster series however its sitting platform is effectively longer front to back. - This paired with a larger centre relief channel helps disperse pressure while reducing contact where appropriate. - Popular with men and women alike. - Manufactured using a new vacuum moulded process, which gives a supple surface and a clean edge finish with a glimpse of the colourful underlighting.

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

The Hawk 22mm cranks are fully heat-treated and feature 4130 chromoly crank arms made with custom forged tubing, investment cast oversize spindle bosses, and a wraparound spindle gusset for increased strength and rigidity. A 22mm hollow chromoly spindle and hollow chromoly spindle bolts helps shed weight without sacrificing strength. - RHD/LHD compatible - Bore: 22 - Spindle Material: Steel - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

Shimano's Deore BL-M6000 lever provides powerful, responsive braking for diverse mountain bike riding styles. With Servo Wave Action technology, reach adjustment, and I-spec II compatibility, the Shimano Deore lever delivers performance and affordability. - Smooth and predictable control with a balance of power and rigidity - Stable braking performance in any weather conditions - Durable construction with a sleek integrated appearance - Compatible with IceTech pads (sold separately)

With quicker brake engagement and shorter free stroke, the Shimano Deore BR-M6100 brake set delivers intuitive braking so you can stay focused on the trail ahead. The I-Spec EV shift lever offers a wider adjustment range for superior rider tuning. - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-Spec EV shifting lever - Lever/caliper sets sold individually for front or rear.

Shimano Saint hydraulic disc brakes feature an opposed ceramic 4-piston design which helps absorb rotor heat and reduce vibrations. The Servo Wave 2-finger levers feature tool-free stroke and position adjustment, while the one-way bleeding caliper and hinged lever clamp offer easy installation and maintenance. - Brakes are pre-bled for convenient installation - Includes metal ICE TECH pads with radiator fins - I-spec B-type shift lever compatible

What’s it going to take to ride that line? It’s steep. It’s rocky. You’ve passed it a hundred times. But not this time. With SRAM's Guide R, you have the power. Proven 4-piston calipers give you smooth, one-finger control. Features like Reach Adjust let you dial it in just right. And Guide perfectly complements other SRAM components and gives you flawless performance on every ride.

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by. Features: - Fully redesigned - Laboratory tested and team proven - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - New, optimized, 4mm dropout shape for grind and peg clearance - Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474 - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty Specs: - 25mm steep offset - 3/8-inch axle slots only - 990 brake mounts - Starting at 2lb 2oz (912 grams)

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

- Stretch-proof, super-narrow chain for use with 10-speed Campagnolo/Shimano/SRAM - Use: Mountain/Road - Size: 11/128-inch - Width: 5.9mm - Weight: 273 grams - 116 links

Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch