Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
$4.50
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$21.00
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel
$914.00
This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference
$59.99
Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g
$91.99
The Profile Gun Drilled Hollow (GDH) 19mm Crank spindles are a great way to take a large chunk of weight off of your bike without sacrificing a great deal of durability. -Uses GDH Crank Tool. Older crank tools will not work. -Includes 6mm GDH CrMo crank bolts and aluminum flush washers. -The GDH CrMo axle has the same Limited Lifetime Warranty as the Race Cranks. 5.625" (For BMX Frames) Weight: 203g / 7.15oz 6" (For 68mm & 73mm external Euro BB’s, fits most DJ frames) Weight: 217g / 7.65oz
$9.99
Chromoly 3/8" socket head bolts for use in any Profile BMX/MTB or Madera 3/8? threaded hub axle. -Bolts sold individually -Washers and cones not included -Use 8mm or 5/16' hex keys
$29.99
-The Aegis Rear Hub Guard is Designed with today’s smaller dropouts in mind, it replaces the cone spacer on 3/8 hubs as well as the cone spacer and lock nut on 14mm hubs.-Fits all Profile Mini, Elite, and Totem Cassette hubs, as well as Madera V2 Cassette hubs. -The Aegis Front Hub Guard will fit on Profile Mini, Totem, and Elite front hubs, as well as the Madera Pilot V2 hub. It replaces the cone spacer. Priced Individually
$21.99
BUTTON HEAD BOLTS are an upgrade to standard socket head(allen) bolt. They feature a smooth, rounded finish. There are three Button Head bolt styles available: 3/8" (10mm) bolt - will fit 3/8 drop outs. 3/8" (10mm) with 14mm step - will fit 14mm dropouts 3/8" with 14mm Dropout & Peg Step - The peg version, has a longer step with enough room for a 14mm peg.
$23.99
REAR (DRIVE SIDE): -The Profile Racing C4 Drive Side Guard is made from injection molded plastic. -Must be used with the proprietary steel insert which threads on 14mm axle and substitutes existing drive side jam nut. -Can be used on all 14mm rear Profile and Madera Cassette Hubs (including Madera V-2 and Gulf Coaster, and Profile Mini, Totem, Elite, and Zcoaster). -Can be used on either RHD or LHD Hubs. -Works only with 14mm axles REAR: -CNC machined from Delrin (a really strong and durable plastic) -Can be used on Profile Elite, Mini ,Totem, and ZCoaster rear hubs as well Madera V2 Rear hub in 14mm Only. -Works only with Madera and Profile 14mm axles as the guard fits over the jam nut. Will NOT work with 3/8 hubs. -The hub guard slides over the 14mm jam nut – It will sit snug against your drop out and hub cone when the wheel is tightened down. FRONT: -CNC machined from Delrin (a really strong and durable plastic) -Can be used on Profile Elite & Mini front hubs as well as Madera Pilot front hubs. -Works only with Profile/Madera Knurled cones. Will NOT work with the older style, all aluminum front hub cones. -You can buy an adaptable cone with the guard if you don’t have the right one. -The hub guard slides over the hub cone – It will sit snug against your fork and hub cone when the wheel is tightened down. Note: Plastic wears faster than aluminum, especially when used on very rough surfaces. The Madera C-4 guards are intended to be used for ramp and light street.
$71.99 - $75.99
Chromoly 4-pawl drivers compatible with Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. -For 1/8 width" chains. -Drivers include bearings & seals. -Pawls, springs, & cogs NOT included. -Drivers are RHD/LHD compatible.
$4.99
Replacement bolts for all Profile BMX, Madera Bmx, and Profile MTB stems. PRICE IS PER BOLT
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. For use on Profile Racing Elite Cassette hubs.
$67.99
-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 22mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. Supplied with 22mm splined steel insert. Weight: 25t: 78g/2.75oz 28t: 87g/3.05oz 30t: 96g/3.35oz NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though.
$114.99 - $119.99
-The Profile Helm MTB stem is for Downhill, Freeride, and Enduro applications. -31.8mm or 35mm bar clamp, and standard 1 1/8" steerer tube clamp. -Stack Height: 20mm(.8?) -0 degree rise -Moto-Clamp front bolts (top two bolts fully tighten, bottom bolts to adjust clamp pressure). -Made from fully CNC machined, 7075 Billet Aluminum. Stem body machined with radius and chamfered edges for a smooth finish. -Anodized colors with laser etched graphics. Sizes: 32mm ,40mm, 50mm, 60mm
$36.99
-For use with 19mm axle. Bottom Bracket kit includes: Bearings (2) Tube spacer (1) Color anodized cones (2) 5mm Tube spacer (1) 1/8' Thick spacer (1) 1/16' Thin spacer (1)
$224.99
-Profile Racing designed the Mini Cassette Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. This hub is LEFT SIDE DRIVE High/Low Flange Hubshell Standard BMX 110mm hub width It is important to also replace your chain whenever you install a new driver. A worn, stretched chain will cause your driver to wear out much faster.
$119.99
-Profile Racing designed Mini Front Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. Low Flange hubshell Standard BMX 100mm hub width 3/8’s aluminum axle NOT intended for heavy street riding.
$79.99
Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability. 14mm GDH Mini Cassette Axle also fits Totem, High Flange, & Madera cassette hubs.
$66.99
-Includes LH & RH threaded cups, bearings(2), tube spacer, cone spacer, & aluminum/steel spacers. -Bottom Bracket widths: 68mm, 73mm -Installs with Park Tool BBT-9.
$45.99
-Kevlar base -Medium padding -Black seat with color stitched Profile Wing P Logo
$75.99
-The “Push” stem is named after Mark Mulville's favorite trails. Reach: 48mm or 53mm Stack Height: 33mm Rise: 31.7mm (Upright) / 1.3mm (Invert) ***USES 1/4 ALLEN WRENCH***
$199.99
YOU MUST SPECIFY SPINDLE SIZE IN ORDER NOTES. IF YOU ARE UNSURE OF SIZING, PLEASE GIVE US A CALL! SPINDLES ARE AVAILABLE IN 5 5/8" (BMX) & 6" (DJ) OPTIONS *The Profile 19mm ‘Race Crank’ is made for any type of riding, whether it be Bmx Race, Bmx Freestyle, or MTB. -Crankset includes crank arms, 19mm GDH heat-treated CrMo axle, GDH CrMo axle bolts, flush washers, sprocket bolt, and crank installation/removal tool. -Titanium upgrades available for axle, axle bolts, and sprocket bolt. -Guide for 19mm axle lengths: -5.625"(for Mid, American, Spanish, and internal Euro BB’s) -6.0"(for 68mm & 73mm external Euro BB’s) -BOTTOM BRACKET SOLD SEPARATELY -Profile Racing offers a lifetime Warranty to original purchaser.
$67.99 - $79.99
-CNC machined from 7075 Aluminum in the USA! -Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. -Available for 19mm splined axles only. -1/8? tooth width for use with most freestyle/street & single speed chains. -Supplied with 19mm splined steel insert. NOTE: Spline drive sprockets are not compatible with 2-piece cranks for Right Side Drive (not enough room for splines). Spline drive sprockets are compatible on Left Side Drive 2-piece cranks though
$9.99
Sprocket Spacer. Spider Adapter. Hat Washer. No matter what you call it, you probably need it to make your sprocket fit your crank axle properly. These go on the back side of the sprocket, and are made of steel. These are not actually needed for Profile bolt-on spiders, which fit flush on a 19mm crank axle.
$359.99
-The Z Coaster® is a proprietary freecoaster style hub engineered, designed, & manufactured by Profile Racing. It essentially works as a spring/pawl cassette hub that can be disengaged into a freecoaster with varying slack options. Highlights of the Z Coaster®: The Z Coaster®’s Pawl is “Z” shaped to allow for engagement/disengagement by the center Slack Cam Ring. This allows for adjustable slack by being able to switch cam rings. The Z Coaster® has an outer driver support bearing for the oversized driver mechanism. This bearing supports the driver from the outside. The Z Coaster®’s pawls and ratchet ring have a proprietary coating that offer smooth engagement. RHD 36h 14mm male axle Made in the USA at the Profile Racing factory.
$25.99
-Designed only for the Profile Z Coaster® and Madera Gulf Coaster Rear Hub (Non Drive Side) -Compression fit into your drop-out as you tighten your wheel. -Fits over the Non-Drive Jam Nut (Do not remove jam nut or cone) **If needed, the Z Coaster® And Madera Gulf Coaster accepts the standard AEGIS DRIVE SIDE HUB GUARD**
$17.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Page 1 of 4 Next page